Do you have a blender? If so, you almost certainly understand how often it is to keep up one. You would possibly even be experiencing a number of the common problems related to blenders, like food stuck within the blades or an old gasket that’s able to give out. If this is often true for you, don’t worry!
If you use a blender regularly, you ought to look at these easy DIY (Do it yourself) techniques to extend your equipment’s lifetime. They’ll not only help it live longer, but they’ll also facilitate your spot problems before they happen. To create things easier.
HOW TO MAINTAIN YOUR BLENDER
How often you use the Blender is not an issue of maintenance concern. For your Blender to last long and perform as nicely as it did the first time you used it, you must do some simple maintenance for it every after-a while. With proper maintenance, a blender that is meant to last for about three years can last even longer than that, and without maintenance, it may last even less than half the time it is designed to last. Instead of spending money on the costs of taking your Blender for servicing now and then or even buying a whole new blender, try out my simple ways of what you should do for your Blender to last as much as its durability allows it to.
When purchasing a blender from a store, we should read the manufacturer’s guide before using it. We should learn how to maintain Blender based on this manual and the operating time of the Blender. Moreover, how the jar is fastened to the machine, and the signals that indicate troubles.
It is essential to keep in mind that when using the Blender, do not overload it. It is a fundamental matter. Overloading damages the motor and reduces performance very rapidly. Overloading foods and other frozen items increase the load on the blades too.
Add your items correctly:
Most new users of the Blender are not familiar with the use of this machine. They are unaware of the correct sequence of food and liquids in the Blender. Before using a blender or making items in it, we should be familiar with food and fluid measurements. When the food stocks or is overloaded in the Blender, it harms the machine blades and engine.
Hard foods should be avoided:
Blenders are mainly used for mixing softer food or liquids. Try to avoid hard food such as ginger, ice, potatoes, etc. But if you want to blend hard food, I recommend chopping small pieces for an easier blend. Make sure to put a small portion to avoid overloading the jar blender. Moreover, you can use a food processor for a better grinding method.
Avoid starting blender while being empty:
Running with an empty jar can also lead to a damaged motor in the Blender. Therefore, it will shorten the sharpness of the blade. We have to ensure that there is something in the Blender, and then we can run it.
Examine for damages:
Before operating the Blender, you must inspect the jar, cables, and blades to fix it and avoid accidents.
Careful with speed setting:
Before starting the Blender, switch to a slow setting and work your way up. Using a fast setting first will eventually drain your motor and blades. Plus, it gets a smoother texture if you use the Method.
Keep it unplugged:
Make surely unplug after using the Blender. This will save electric power and a long-lasting blender and keep it safe and active.
If you use a blender often, it’s better to do monthly maintenance. Check all the motor, blade, jar, and other pieces to see any damage from using the Blender. After maintenance, please wash with dish soap and dry before reassembling the machine.
If you notice that your blades are a little rusty, this does not necessarily mean that you have to purchase a brand-new blender. However, you have to remove the rust. To do this, first, remove the blades. You will also want to make a baking soda paste or hydrogen sodium carbonates with water. Make sure you clean the blade first, then use a toothbrush to scrub on the paste. Next, use an abrasive material to buff within paste and take away the rust. Rinse with water and wipe.
HOW TO CLEAN YOUR BLENDER
Cleaning a blender requires more effort than washing a pan or putting something in the dishwasher. Cleaning the blender jar is vital for preserving the device and preventing bacteria from food residue that gets stuck in the nooks and crevices at the bottom. A well-maintained, clean blender lasts longer and performs better. Here are some cleaning suggestions to ensure that your kitchen blender lasts as long as possible.
Disassemble the Blender:
First of all, Unplug the blender unit and then removes the jar assembly from the motor base and then remove the jar lid, unscrew the base of the jar (beware of the sharp blade), remove the gasket seal and the blade.
With a cloth or sponge, Wash it in warm soapy water. Rinse it well, then dry it carefully. The blender jar can also be washed in the dishwasher on the top rack, although hand-washing is faster and eliminates the risk of etching the glass or plastic. Wash it with hot soapy water and a towel or sponge.
Wash the other small piece:
Clean the blade, gasket, inter-locking ring with soapy water. When cleaning the blades, use precautions to prevent cuts. You may choose to use dishwasher gloves to clean the slides. In addition, do not forget to clean the lower parts of the blade, which many people forget. After cleaning, flush and dry them. Cleaning the motor component is simple; you should use a wet cloth to clean the surface. Please do not submerge the entire unit in water as it may be damaged. Be sure to clean your Blender’s buttons, bottom, and sides.
Clean the Motor housing:
Always disconnect the Blender before cleaning the lower portion of the engine. Never immerse it in water. It is also not safe to wash in the dishwater. Don’t forget to clean the cord and check for damage regularly.
Reassemble the Blender and store it:
After cleaning and drying all the parts in your Blender, you can now reassemble them and store them on the countertop.
Quick Method of cleaning Blender (without taking it parts)
We understand you’re pressed for time, so we’ll make it brief. Fill half of your filthy Blender with warm water, then add a few drops of dish soap to finish. Fasten the lid into the Blender and turn it on for 10-20 seconds. Rinse the Blender thoroughly with more water and should have a completely clean blender with no leftover smoothies, soups, puréed baby food, etc.
HOW TO REPAIR YOUR BLENDER
Blenders come in a variety of pricing ranges, from low-cost to high-end. When something goes wrong with a mid-to-high-level machine, it can be aggravating, and it can happen even if you take good care of it. Fortunately, several customers mistake many faults for their appliance’s death rattle are often troubleshot and fixed.
Repair a leak:
Another common issue with blenders is leaking. The leak usually originates between the base and the blender jar. The blade shaft could cause e problem.
Fortunately, the manufacturer can point you in the proper direction for a quick fix. If the leak is coming from the blender jar or plastic, the entire item will need to be replaced. Repairing it is not suggested because a patch will likely make it worse, and particles from the jar will likely wind up in your drink. Make sure to Double-check the owner’s instructions and warranty before trying any Blender repairs.
Any electrical issues with the engine or cable should also be treated by a professional. It’s conceivable that conducting repairs yourself can void your warranty, so make sure you read everything first.
One of the most typical issues is blade jamming. When you turn on the Blender, you’ll immediately see the problem. There will be a buzz from the motor, but the blades will not revolve. Food items that are too large become trapped between the bottom and the blade, causing the problem. The best solution is to empty the container and slice the food into little bits.
You could also try increasing the speed to clear the jam. It might be due to various issues if your Blender does not turn on at all. Make sure it’s not the outlet you’re using first. Next, check your Blender’s electrical cable to ensure it’s in excellent operating condition. If this is the case, stop using this product immediately away. If you’re still having trouble, there might be a problem with the power switch.
Replacing a switch:
Replacing a switch is not a difficult job. It is also significantly less expensive than buying a new brand switch. Contact the manufacturer to make a replacement order (they may point you to a service center). Removing a few screws, taking out the old switch, and replacing it with the new one is generally all that is required to replace the switch.
Blenders have become a vital and valuable device in many kitchens. It is an electronic machine that requires maintenance, cleaning, and repairing as the other accessories we use daily. There are many maintenance tasks we should do to benefit from them. If we follow that, our Blender will work perfectly, and make sure to clean your Blender after each use. Following these tips and tricks for maintaining your Blender will help you keep working, sustainable and efficient.
How do I know if my blender motor is bad?
It stops midway through blending:
That’s a clear sign of his death. You can try to let it rest for a couple of minutes and restart it, but more often than not, its engine has blown. Check your Blender’s warranty to see if you qualify for a replacement before purchasing a brand new one – you might be lucky.
The motor is slow or inconsistent.
If it doesn’t blend like it used to, and it produces poor results, it means he’s probably on his way out. You could keep trying to use it until it runs out, or you could try to evaluate the problem to see if it can be repaired. It might have something to do with the fuse shorting or loose wire. Please bring it to a small appliance repair shop to verify what is happening.
Can Blender over heat-What to do?
If you think your Blender is over-heated, stop using it immediately. It may be a fire hazard and a danger to you, depending on the severity of the overheating. Let it sit unplugged to cool down. Even if it is not a danger, continuing to use it while overheating will further damage your Blender.